New Scania service station in Golitsyno

7 September 2016 held the official opening of a new service station dealer's Scania subsidiary of OOO "Scania Service" in Golitsyno...

7 September 2016 held the official opening of a new service station dealer's Scania subsidiary of OOO "Scania Service" in the Moscow region, Golitsyno

According to the highest standards

Total area of the new dealership is 6 229 m², the complex includes administrative building with an adjacent repair area and the area of body repair. Scania continues to invest in the development of dealer network in Russia project implemented in Golitsyno is the result of investments. Over the next three years plans to invest 2 billion rubles in the development of the dealers network of Scania.

In the building of the dealer centre has modern equipment of European production, allowing to provide fast and quality repair and maintenance of trucks, buses, industrial installations, including machinery equipped with engines running on methane fuel. In a three-storey administrative building has an Elevator to lift visitors with disabilities. The site is located 8 lines maintenance of equipment (16 jobs), including the line of diagnosticity of the state technical inspection, the line sinks, the body portion with two power lines gender and the two lines of Assembly/disassembly.

The station is equipped with modern systems of accounting for and distribution of oil, the Swedish company "ORION", 6 handout colon save productive time mechanics. Repair area is equipped with modern compressor equipment "AtlasCopco". For comfortable work of the staff of the repair zone it is illuminated by led lights, it allows you to achieve a lighting level of 700 Lux – the light level is two times higher than the Russian standard 400 Lux, which contributes to less fatigue mechanics.

The inspection pits in the repair area equipped with modern kanashimi lifts "MANA", allowing the car lift in a short time.  In oil pits also provided a modern system of collection and distribution of oil, this solution optimizes the work of service technicians, because less time is spent on draining and the Bay of fluids in the car.

The body portion is equipped with a spray chamber combined with a preparation area for painting. This area includes equipment for straightening, which allows the following types of repairs: edit axes, restoration of the geometry of the chassis of the vehicle, the edit booths, repair of dump bodies.

On line wash applied the updated system of water flow and detergent. With a single gun washer can switch the mode and to apply the composition, and then rinse with water. This system allows to reduce time for washing the car, and reduce the turn.

The portfolio of services of OOO "Scania Service" is the implementation of long-term programs for THE maintenance on semi-trailers, the evacuation of avtomobilei technical assistance on the road, extension of warranty to 5 years. When transferring equipment to the driver orientation seminars were conducted by specialists Scania. Thanks to the monitoring system fleet FMS (Fleet Management System) the client receives complete information on the location of the equipment, the driver's behavior behind the wheel, vehicle speed, and engine hours, and service center, in turn, receives the data for remote diagnostics.

"Innovation is an integral part of the development of Scania, we reiterate that not only the launch of new products and service solutions, but also advanced the construction of service centers, equipped according to all European quality standards", - said the Director of the Department of management and development of our dealers håkan Jude.

Spectacular new

At the opening of the service station for the first time demonstrated a new and unique off-road dump truck, which was given the name "Black Talon" ("the Black Claw"). The machine is designed for heavy work in harsh conditions.

The legendary king of tuning truck 77-year-old Sven-Erik "Svempa" Bergendahl (Sven-Erik "Svempa" Bergendahl) known throughout the world. So far in his tuning company developed only trucks Scania, but now for the first time he took up the revision of the truck. The author's approach was applied not only to the appearance of the truck that stands out, immediately rushing to the eye, but also to the design of the cab interior: stylized upholstery, steering wheel and door panels. The result is a car with an exclusive, memorable design "Black Claw".

Dump truck is equipped with an economical inline 6-cylinder 13-litre Scania DC13 engine with a power of 400 HP with high torque. Compliance with the environmental standard Euro-5 provides system emission control Scania SCR.

Gearbox 12+2 speed with a divider equipped with a system for automatic transfer from one stage to another Opticruise and Scania hydraulic retarder the Scania retarder, which is designed to reduce vehicle speed without engaging the primary braking system. This increases safety and reduces operating costs.

All-wheel drive chassis has parabolic springs front and rear, permitted front axle load is 9 tons on rear bogie of 26.5 tons.

The machine has been designed for use exclusively in the Siberian region, on the territory of permafrost, and "walk" must not only "reliable" winter roads, but also at a time when the top layer of soil thaws for a bit and the soil turns into a viscous mixture of mud, sand and clay, greatly hindering movement. To increase flotation and maneuverability in harsh off-road conditions applied planar busbar with high flotation tires dimension 16.00R20, what distinguishes this dump truck from "traditional".

Regional Director of "mining equipment" Scania CV AB Nicholas Konovalov said: "With an optimum combination of high permeability and capacity, dump truck Scania P 400 6x6 terrain is a sensible alternative to the articulated dump trucks of light and medium classes, with a significantly higher cost."

Dump body with rear unloading produced by Istrail made of high strength Swedish steel Hardox 450. The body has a geometrical volume of 16 cubic meters, and to transport materials with high density, it is possible to easily reduce it to 2 cubic meters, thanks to the intelligent design of the extenders on the bolts. Reliable hydraulics Nummi high performance provides fast body lift and unloading the truck.

Car Scania P 400 6x6 series "Black Claw" is adapted to work at low temperatures with additional heat insulation of the cabin, self-contained diesel engine heaters and cabin, electric engine, fuel filter, mirrors and driver seat. The design also includes a high capacity battery 225 Ah, the hoses from frost-resistant rubber, heated body exhaust gases and supply hydraulically operated to prevent freezing of material.

.