American technology for the Russian builders

23.10.2019

"Zeppelin Rusland" showed a new range of road construction equipment Caterpillar

OOO "Zeppelin Russland" ("Zeppelin Russland") – the official dealer of Caterpillar in the North-West, Central and South-Western regions of Russia held an annual conference and seminar, where dealers and customers could get acquainted with novelties of special equipment, road building technologies and services offered by Caterpillar in the domestic market.

High interest was the innovative examples of technology that have demonstrated their capabilities in action. Two models of excavators, the most common weight category have demonstrated their ability to manage intelligent 2D and 3D leveling systems. In particular consumers will certainly appreciate that in these models it is possible to specify restrictions on the digging depth, the boom, the angle formed by the surface as well as on-Board weighing system of the soil in the bucket.

Hydraulic excavator Cat 320 GC

Hydraulic excavator Cat 320 GC, equipped with a 145-strong brand diesel engine, has an operating weight of 20.5 tonnes and a maximum digging depth - mm. 6710 Model is reduced by 20% fuel consumption compared with its predecessor. A similar result is achieved through the use of low-speed motor and hydraulic pump big performance, and the availability of the engine are two modes: "power" for maximum productivity, and more effective is "adaptive".
Along with this, Cat 320 GC reduced the cost of maintenance and repair. This is achieved thanks to the extended and synchronized service intervals, a more optimal positioning of the filters groups for faster service, extended service oil filters, new hydraulic filter high capacity air filter Cat new design with twice the service life compared to the earlier counterpart.

Style teeth Advansys enhance the penetration of the bucket in the ground

In the upgraded, more comfortable cabin is located touch screen and electro-hydraulic joysticks, through which the installation has managed to reduce the volume of the working fluid in the hydraulic system of almost 40 litres. Shovel got telematic system Product Link.

An equally favorable impression of larger and more productive excavator Cat 330 (photo on the splash screen), equipped with a diesel engine capacity of 263 L.C. machine Operating weight is 30 tons and maximum digging depth is 7250 mm. compared to the earlier model, the new model fuel efficiency and load capacity increased by 15% and the engine torque by 5%, due to lightweight work on the slopes.
The hydraulic system 330 has a Cat intelligent control, due to the fact that the pair of hydraulic pumps arranged in series, creating optimum pressure for operation depending on load level. The basic equipment of the excavator includes boom SMART BOOM which DAMPS a vibration during the work cycle. The comfortable and spacious cab with all-round visibility controls located on the armrests of the seat.
Style teeth Cat Advansys enhance the penetration of the bucket into the soil and reduce run time of the operating cycle. Moreover, the tips can be quickly replaced by standard driver.

Backhoe loader Cat 426F2 

Demonstrated its capabilities and backhoe loader of the latest generation Cat 426F2. Machine operating weight of 7.99 - 8.76 tons equipped with 90-horsepower diesel engine. Due to the possibility of a separate braking of the wheels of the right and left side model has excellent maneuverability thanks. It is worth noting that working brakes are multi-plate design and operate in an oil bath, which ensures their high reliability and durability. To overcome various obstacles and sodden ground at the site allow plug-in directly while driving four-wheel drive, with load, in any gear forward or reverse) and the 100-percent differential locks the rear axle. The front axle is equipped with a pendulum mounting, lubrication inherent in the sealed crankcase of the bridge for the entire service life, maintenance is not needed. Gear box shift under load, designed for a speed of 40 km/h.
According to experts "Zeppelin Rusland", Cat 426F2 equipped with most advanced hydraulic system with closed center with load sensing and high-performance pumps. The engine is guaranteed to start at temperatures down to -26°C, option: equipment package for the stable run at temperatures down to -55°C.
Equipment loader with parallelogram lifting bucket has a best-in-class load capacity - maximum height of 3,172 to 3.63 t  & virusnym force – of 51.04–54,48 kN. At the request of the client will establish a system of hydraulic datirovaniya bucket with a load during movement of the loader.
The standard equipment includes the suspension system of the excavator boom when turning and moving. Cat 426F2 can be equipped with a telescopic handle excavator and the dig depth mm. 5697 will be the design of the handle of an excavator with a sliding inner section to prevent contamination on the wear strip. The telescopic handle optional can be equipped with single or bi-directional hydraulic hose management equipment. Feature of backhoe loader has become a completely new cab with flat glass. Optionally available steering column with adjustable angle. The machine is equipped with branded telematics Product Link.
Very useful for the customers was information about the new line of Yellowmark spare parts for construction machinery Caterpillar. Currently, customers are offered original spare parts Cat and more affordable components Cat Reman, restored at the enterprises of the American company. These parts are provided with a full annual Caterpillar warranty. However, there are situations when the owners of Caterpillar equipment requires less components with long service life at an affordable price – for example, if the service life of the machine itself is coming to an end and does not make sense to install it rather expensive item that is guaranteed to last longer than the whole machine.

Yellowmark range of spare parts for construction machinery Caterpillar

For such cases, at the request of customers Caterpillar engineers have developed a line of budget parts Yellowmark, which currently includes more than 6,000 parts. This includes: oil and water pumps, gear drives and bearings, mufflers, components, radiators, gear final drives, gasket kits for hydraulic pumps and motors, manifolds, valves and many other parts designed for excavators, graders, forklifts, bulldozers and other road construction Caterpillar equipment operating in light to medium duty work. The range covered by Yellowmark, include only those details that are recognized by professionals Caterpillar suitable to reduce the cost and use of the technique Cat of that quality. This range is constantly expanding. Price of parts Yellowmark can be up to 50% lower than the original Caterpillar spare parts. Manufacture of spare parts Yellowmark all companies is conducted under the strict supervision of the engineers of Caterpillar.
It can be noted that parts Yellowmark is the best choice for the repair of equipment with low residual resource life. However, parts Yellowmark worked perfectly within the guaranteed service life for a period of 12 months. You should pay attention to the fact that the components of this group – one-off and recovery program Reman not be.
Unlike components of other manufacturers spare parts Yellowmark designed specifically for use on construction equipment Cat checked by a Caterpillar on the required quality of material and design compatibility and service life. When selecting parts Yellowmark will not have difficulties, because the part numbers in the catalogue correspond to the numbers of original spare parts Caterpillar. The availability of spare parts Yellowmark warehouses and their delivery timeframe is not different from the original parts of Caterpillar.

Paver Cat AP655F

Was also shown a road such equipment as Cat pavers and ice rink AP655F CB34B when performing road works.

Road roller CB34B

.